Determining top dead center

Jump to: navigation, search
(Before you begin)
(Before you begin)
Line 3: Line 3:
  
 
== Before you begin ==
 
== Before you begin ==
 
One of the first things that you will need is a degree wheel, this will tell you EXACTLY where you are at when you turn the engine over. You can take this picture of the degree wheel and have it blown up to a reasonable working size by your local photo copy center. A couple of ways to use it is to have it laminated or glue it to a piece of sheet metal or aluminum.
 
 
[[File:Degreewheel1.jpg]]
 
  
  
Line 101: Line 97:
  
 
There, you're done. You should feel much better now, knowing that when you time the engine with a light, it's dead nuts on the money.
 
There, you're done. You should feel much better now, knowing that when you time the engine with a light, it's dead nuts on the money.
 
[[Category:Engine]]
 
 
 
 
[[Category:Engine]]
 

Revision as of 11:39, 14 May 2011

Personal tools
Namespaces
Variants
Actions
Navigation
Categories
Toolbox