Choosing a carburetor

Jump to: navigation, search

@@ Line 48: / Line 48: @@
 == Holley ==
- Holley carburetors have been around for a long time, and their quality is fairly good. They manufactured carburetors for GM in the 60's, and have been a favorite among hot rodders through the years. Holley has several different models for different applications.
+Holley carburetors have been around for a long time, and they have been a favorite among hot rodders through the years. Holley has many different models for different applications, including GM in the 60's for some select high performance Chevy engines, including the BBC Corvette 3x2-barrel carbs. Ford used Holley carbs basically from their beginning.
-Ford used Holley carbs basically from their beginning. GM began using Holley carbs in the '60's on select high performance engines, including 3x2 bbl on BBC Corvette engines.
+Here are a few List numbers (found stamped into the front of the airhorn along with a date code) of the more common or popular Holley carbs:
-Here are just a few:
+*4412S -- a 2 barrel, 500 CFM carburetor that is ideal for a good ratio between CFM and economy. For a 2 barrel, its pretty large. Works well on a stock 2 BBL manifold for engines such as a 327 SBC.
--Holley 4412S -- a 2 barrel, 500 CFM carburetor that is ideal for a good ratio between CFM and economy. For a 2 barrel, its pretty large. Works well on a stock 2 BBL manifold for engines such as a 327 SBC.
+*Holley 80457S - Decent 4 BBL carburetor that flows 600 CFM. It uses mechanical secondaries, so economy takes more of a "backseat" on this one. Would probably be ideal for your daily driver/mild build. This is about the average 4 BBL sized carburetor.
--Holley 80457S - Decent 4 BBL carburetor that flows 600 CFM. It uses mechanical secondaries, so economy takes more of a "backseat" on this one. Would probably be ideal for your daily driver/mild build. This is about the average 4 BBL sized carburetor.
+*0-80457 is a vacuum secondary carb with electric choke, and is in the 4160 family. I would use the 0-1850 as an example a basic 600 CFM carb, and the 0-3310 as a 750 CFM example.  And I'd start by describing the various carb families, like 4150, 4160, 4175, etc.  Newer and more popular carbs are Street Avenger series of 4150 carbs.  By the way, the S or C after the carb list number designates the finish.  S = shiny, C = zinc chromate.  I can do a complete write-up here, or you can simply go to Holley's website for the facts.
-The 0-80457 is a vacuum secondary carb with electric choke, and is in the 4160 family. I would use the 0-1850 as an example a basic 600 CFM carb, and the 0-3310 as a 750 CFM example.  And I'd start by describing the various carb families, like 4150, 4160, 4175, etc.  Newer and more popular carbs are Street Avenger series of 4150 carbs.  By the way, the S or C after the carb list number designates the finish.  S = shiny, C = zinc chromate.  I can do a complete write-up here, or you can simply go to Holley's website for the facts.
+*Holley 80531 - This carburetor flows 850 CFM and is a model 1850. There is little to no economy with this bad boy; this is for use on race/high RPM or strong street/strip type engines.
--Holley 80531 - This carburetor flows 850 CFM and is a model 1850. There is little to no economy with this bad boy; this is for use on race/high RPM or strong street/strip type engines.
+*4776, 4777, 4778, 4779, 4780, 4781 - These are the traditional "double pumpers". Ranging from 600 cfm to 850 cfm, they are a mainstay of racing and hot street engines. If matched correctly to their application they can be used on the street but economy will not be as good as a vacuum secondary carb similarly chosen. These are 1850 type carbs, having both a primary and secondary metering block and accelerator pumps on both the primary and secondary sides of the carb.
-, 4777, 4778, 4779, 4780, 4781 - These are the traditional "double pumpers". Ranging from 600 cfm to 850 cfm, they are a mainstay of racing and hot street engines. If matched correctly to their application they can be used on the street but economy will not be as good as a vacuum secondary carb similarly chosen. These are 1850 type carbs, having both a primary and secondary metering block and accelerator pumps on both the primary and secondary sides of the carb.
+*4604 - This is one of the Holley 3-barrel carbs rated at 1050 cfm. The 3 barrel Holley was originally designed for NASCAR stock car racing and was used on the 426 Hemi in 1964. It preceded the Dominator and offered in several versions. It never really hit its stride, suffering from issues below WOT because of the less-than-ideal secondary venturi shape (and booster style in the 1050 cfm version). It was made basically from a Holley 850 w/the center taken out of the secondaries. It used an oversize secondary vacuum diaphragm housing (which the diaphragms are no longer available for) and an early version of the "cathedral" center hung float bowls made famous later, on the Dominator. A carb kit for a 850 can be used w/some modification to rebuild them. Today it has a following among collectors and some actually still use them. They  can fetch high prices for good examples.
-- This is one of the Holley 3-barrel carbs rated at 1050 cfm. The 3 barrel Holley was originally designed for NASCAR stock car racing and was used on the 426 Hemi in 1964. It preceded the Dominator and offered in several versions. It never really hit its stride, suffering from issues below WOT because of the less-than-ideal secondary venturi shape (and booster style in the 1050 cfm version). It was made basically from a Holley 850 w/the center taken out of the secondaries. It used an oversize secondary vacuum diaphragm housing (which the diaphragms are no longer available for) and an early version of the "cathedral" center hung float bowls made famous later, on the Dominator. A carb kit for a 850 can be used w/some modification to rebuild them. Today it has a following among collectors and some actually still use them. They  can fetch high prices for good examples.
+*0-80532-1 - This represents the Dominator series of Holley carbs, this one is 1250 cfm. The Dominator first was used on the high banks of NASCAR to feed the biggest engines ever used in that form of motorsports. They became just as popular for drag racing and today are available as small as 750 cfm (Holley 0-80186-1) for the "look" w/o the huge flow so it can be used on the street. Because the bolt pattern and footprint is considerably larger than the traditional Holley "squarebore" pattern, a Dominator requires a dedicated intake manifold. Adaptors are available, but should only be used in special circumstances if at all.
--80532-1 - This represents the Dominator series of Holley carbs, this one is 1250 cfm. The Dominator first was used on the high banks of NASCAR to feed the biggest engines ever used in that form of motorsports. They became just as popular for drag racing and today are available as small as 750 cfm (Holley 0-80186-1) for the "look" w/o the huge flow so it can be used on the street. Because the bolt pattern and footprint is considerably larger than the traditional Holley "squarebore" pattern, a Dominator requires a dedicated intake manifold. Adaptors are available, but should only be used in special circumstances if at all.
 [http://www.usmotors.cz/old/tech_tips/HolleyCarbList.pdf Holley Carb Numerical Listing]
 == Edelbrock Performer/AVS Thunder==

Choosing a carburetor

Revision as of 15:48, 21 February 2012

Personal tools

Namespaces

Variants

Views

Actions

Search

Navigation

Categories

Toolbox