Bulletproof cooling system
(→What You Put In Your Cooling System) |
(→WHAT CAUSES OVERHEATING?) |
||
| Line 11: | Line 11: | ||
== WHAT CAUSES OVERHEATING? == | == WHAT CAUSES OVERHEATING? == | ||
| − | Overheating can be caused by anything that decreases the cooling system’s ability to absorb, transport and dissipate heat. A low coolant level, loss of coolant (through internal or external leaks), poor heat conductivity inside the engine because of accumulated deposits in the water jackets, a defective thermostat that doesn’t open, poor airflow through the radiator, a slipping fan clutch, an inoperative electric cooling fan, a collapsed lower radiator hose, an eroded or loose water pump impeller, or even a defective radiator cap. One of nature’s basic laws says that heat always flows from an area of higher temperature to an area of lesser temperature, never the other way around. The only way to cool hot metal, therefore, is to keep it in constant contact with a cooler liquid. | + | Overheating can be caused by anything that decreases the cooling system’s ability to absorb, transport and dissipate heat. A low coolant level, loss of coolant (through internal or external leaks), poor heat conductivity inside the engine because of accumulated deposits in the water jackets, a defective thermostat that doesn’t open, poor airflow through the radiator, a slipping fan clutch, an inoperative electric cooling fan, a collapsed lower radiator hose, an eroded or loose water pump impeller, or even a defective radiator cap. One of nature’s basic laws says that heat always flows from an area of higher temperature to an area of lesser temperature, never the other way around. The only way to cool hot metal, therefore, is to keep it in constant contact with a cooler liquid. The only way to do that is to keep the coolant in constant circulation. As soon as circulation stops, either because of a problem with the water pump, thermostat, or loss of coolant, temperatures begin to rise and the engine starts to overheat. |
| − | + | ||
| − | + | ||
| + | The coolant also has to get rid of the heat it soaks up while passing through the block and head(s). So the radiator must be capable of doing its job, which requires the help of an efficient cooling fan at slow speeds. Finally, the thermostat must be doing its job to keep the engine’s average temperature within the normal range. If the thermostat fails to open, it will effectively block the flow of coolant and the engine will overheat. | ||
==Bulletproof cooling system tips== | ==Bulletproof cooling system tips== | ||
Your Privacy Choices