Editing Adjusting hydraulic lifters
Line 36: | Line 36: | ||
[[File:Lifter expolded view.jpg|thumb|200px|left|Arrow points to check ball retainer on the end of the plunger]] | [[File:Lifter expolded view.jpg|thumb|200px|left|Arrow points to check ball retainer on the end of the plunger]] | ||
[[File:Lifter clips 002.jpg|thumb|350px|Three styles of lifter cup retainers. The [http://www.truarc.com/pdfs/Truarc%20Catalog.pdf internal C-clip type] is stronger and should be used especially with solid lifters or when "zero lashing" lifters.]] | [[File:Lifter clips 002.jpg|thumb|350px|Three styles of lifter cup retainers. The [http://www.truarc.com/pdfs/Truarc%20Catalog.pdf internal C-clip type] is stronger and should be used especially with solid lifters or when "zero lashing" lifters.]] | ||
− | When a lifter is noisy, often all that has happened is the check ball retainer assembly isn't fully seated into the recess on the bottom of the plunger, or a speck of dirt has lodged between the check ball and seat. This can be fixed, but requires the intake to come off to get to the lifter. | + | When a lifter is noisy, often all that has happened is the check ball retainer assembly isn't fully seated into the recess on the bottom of the plunger, or a speck of dirt has lodged between the check ball and seat. This can be fixed, but requires the intake to come off to get to the lifter. |
Shown left, is a disassembled GM hydraulic roller lifter. Most current flat tappet lifters have the same internal construction as this roller lifter, although there are different styles. But as long as the styles are the same, the piston from one can usually be fitted into another body. The arrow shows the location of the cup, spring and check ball assembly mentioned above.<br style="clear:both"/> Details are at the page linked to above. | Shown left, is a disassembled GM hydraulic roller lifter. Most current flat tappet lifters have the same internal construction as this roller lifter, although there are different styles. But as long as the styles are the same, the piston from one can usually be fitted into another body. The arrow shows the location of the cup, spring and check ball assembly mentioned above.<br style="clear:both"/> Details are at the page linked to above. |