AMC V-8s
From Crankshaft Coalition Wiki
(See Borg Warner Corporate history website pages) |
(→Overview) |
||
| Line 1: | Line 1: | ||
| − | + | ||
[[File:Amc v8.jpg|right|420px]] | [[File:Amc v8.jpg|right|420px]] | ||
<br><br><br> | <br><br><br> | ||
| Line 5: | Line 5: | ||
The AMC V8 has a [http://www.crankshaftcoalition.com/wiki/Talk:AMC_V-8s storied] history. Read about the pros and cons of both AMC V8 engines. This article will touch on the highlights. | The AMC V8 has a [http://www.crankshaftcoalition.com/wiki/Talk:AMC_V-8s storied] history. Read about the pros and cons of both AMC V8 engines. This article will touch on the highlights. | ||
| − | + | Portions of the following text came from [http://www.wps.com/AMC/Rambler-327/The%20New%20American%20Motors%20V-8%20Engine%20%28SAE%20Paper%20details%29.htm The New American Motors V-8 Engine] by John F. Adamson, Carl E. Burke and David B. Potter of the American Motors Corp. This paper was first presented at the SAE National Passenger-Car, Body and Materials Meeting, Detroit, Michigan, March 7, 1956. | |
==In the beginning== | ==In the beginning== | ||
| Line 39: | Line 39: | ||
All 250 engines were made having solid lifters and adjustable rocker arms. All 287 and most 327 versions came with self adjusting hydraulic lifters. These engines were also used by Grey Marine for boats in the late '50s through the mid '60s. All the marine engines used solid lifters regardless of size. The easily removed 'two wingnut' style valve covers imply original solid lifter design. | All 250 engines were made having solid lifters and adjustable rocker arms. All 287 and most 327 versions came with self adjusting hydraulic lifters. These engines were also used by Grey Marine for boats in the late '50s through the mid '60s. All the marine engines used solid lifters regardless of size. The easily removed 'two wingnut' style valve covers imply original solid lifter design. | ||
| − | AM's ' | + | AM's first V8 was called 'Rambler V8' in all the old automotive literature. The alpha-numeric 'Gen-1,2,3' names were never used in any American Motors publication. |
'Gen-1', 'Gen-2', etc. labeling ideas were first used by Chevrolet small block V-8 enthusiasts to distinguish the differences among that group of very similar engines. This has apparently led many to believe the terms were "borrowed" from the GM engine family or that a GM enthusiast created the labels. There was a small effort to distinguish between GM and AMC labels: GM models are typically labeled with all capitals (GEN-1, GEN-2, etc., sometimes with no dash), whereas Frank used a single capital (Gen-1, and always a dash). The label was used because it is technically correct and fits. GM's labeling wasn't even considered until others pointed out the similarities, and made the assumption that the labeling was "borrowed". | 'Gen-1', 'Gen-2', etc. labeling ideas were first used by Chevrolet small block V-8 enthusiasts to distinguish the differences among that group of very similar engines. This has apparently led many to believe the terms were "borrowed" from the GM engine family or that a GM enthusiast created the labels. There was a small effort to distinguish between GM and AMC labels: GM models are typically labeled with all capitals (GEN-1, GEN-2, etc., sometimes with no dash), whereas Frank used a single capital (Gen-1, and always a dash). The label was used because it is technically correct and fits. GM's labeling wasn't even considered until others pointed out the similarities, and made the assumption that the labeling was "borrowed". | ||
| Line 138: | Line 138: | ||
==Transmissions== | ==Transmissions== | ||
===Automatic transmissions=== | ===Automatic transmissions=== | ||
| − | AMC used GM hydramatic transmissions in 1957 switching in the '58 model year to | + | AMC used GM hydramatic transmissions in 1957 switching in the '58 model year to "Flash-O-Matic" units manufactured primarily by Warner Gear Division of Borg Warner. Only manual transmissions were used in the 1956 Specials. AMC called the GM automatic "Flashaway" and the Borg-Warner transmission "Flash-O-Matic". It's a three speed cast iron case Borg-Warner Model 8 with a vacuum modulator valve. The column shift quadrant will read P-R-N-2-D-1-L. The 1 and 2 are small. |
A dash mounted push-button shifter mechanism was used in the Rambler 6 and Ambassador from 1958-'62. The American models used a column shifter. The push-buttons were marked N-R-D2-D1-L, with a Park lever under the dash. P-R-N are self explanatory. In D2 the transmission will act like a two speed. It starts in second gear and shifts to third, downshifts only to second. This was mainly used for slippery conditions such as driving in snow or ice. Using second gear prevented excessive wheel spin. Many people think they have a two speed transmission because this is the third forward position on the transmission. Slip it down to D1, however, and you'll find the missing gear! In D1 the trans shifts from first through third and back down. L (low) is first gear only, no up shifts. The trans can safely be shifted into Low at any speed. As a safety feature the trans will not shift down until it has reached a safe speed to do so. If in third it will got to second, then down to first once a safe speed is reached. It will not shift back up until shifted into D1 or D2. To manually shift through the gears start in L, shift up to D1 then as soon as the trans shifts, go back to L. It won't downshift if accelerating. When ready for third gear go back to D1. | A dash mounted push-button shifter mechanism was used in the Rambler 6 and Ambassador from 1958-'62. The American models used a column shifter. The push-buttons were marked N-R-D2-D1-L, with a Park lever under the dash. P-R-N are self explanatory. In D2 the transmission will act like a two speed. It starts in second gear and shifts to third, downshifts only to second. This was mainly used for slippery conditions such as driving in snow or ice. Using second gear prevented excessive wheel spin. Many people think they have a two speed transmission because this is the third forward position on the transmission. Slip it down to D1, however, and you'll find the missing gear! In D1 the trans shifts from first through third and back down. L (low) is first gear only, no up shifts. The trans can safely be shifted into Low at any speed. As a safety feature the trans will not shift down until it has reached a safe speed to do so. If in third it will got to second, then down to first once a safe speed is reached. It will not shift back up until shifted into D1 or D2. To manually shift through the gears start in L, shift up to D1 then as soon as the trans shifts, go back to L. It won't downshift if accelerating. When ready for third gear go back to D1. | ||
| Line 145: | Line 145: | ||
These are reasonably heavy duty transmissions. They are equivalent to a Ford-O-Matic or FMX three speed, which were used behind their 352 and 390 cid engines, moreover in smaller V8 Ford 150 thru 1979. Borg-Warner's website history page states they made Ford-O-Matic in 1950. Ford contracted to buy 50% of their automatic transmissions from Borg-Warner through 1958, and built a factory to build the other 50% on their own. That's why the same trans kit will work with Borg-Warner and several Ford auto transmissions; BUT it '''is not''' a Ford transmission! The Ford transmissions '''should''' bolt to the AMC bellhousing, no one I know has tried since the older Ford transmissions and parts availability is about the same as the Borg-Warner units. | These are reasonably heavy duty transmissions. They are equivalent to a Ford-O-Matic or FMX three speed, which were used behind their 352 and 390 cid engines, moreover in smaller V8 Ford 150 thru 1979. Borg-Warner's website history page states they made Ford-O-Matic in 1950. Ford contracted to buy 50% of their automatic transmissions from Borg-Warner through 1958, and built a factory to build the other 50% on their own. That's why the same trans kit will work with Borg-Warner and several Ford auto transmissions; BUT it '''is not''' a Ford transmission! The Ford transmissions '''should''' bolt to the AMC bellhousing, no one I know has tried since the older Ford transmissions and parts availability is about the same as the Borg-Warner units. | ||
| − | |||
| − | |||
| − | |||
| − | |||
Kaiser Jeeps used a TH400 in the Wagoneer and pickup from 1963-'67. It's the "universal" TH400, which was the Buick Nailhead model. Buick Nailhead engines have a deep flange on the back of the block covering the flexplate/flywheel which require a shallower bellhousing than other GM engines. That shallow bellhousing left room to make an adapter without adding length to the engine/trans, so GM sold it as a "universal" model and continued production a few years after the Nailhead was discontinued. If you get one, make sure you get the 1-1/2" to 2" thick cast iron adapter as well as the flexplate and spacer. The crank will need a pilot bushing to match the flexplate. As stated, a Nailhead TH400 will work if you get just the adapter. Rolls-Royce and Jaguar used the universal TH400, among other smaller makers who didn't need enough units to warrant casting a new case. If using another AMC sourced transmission behind a former Jeep 327 with auto, make sure the thin pilot bushing is removed first. When Kaiser-Jeep became part of American Motors in 1970 (AMC/Jeep) the TH400 bellhousing was switched over to the AMC V8 and 72-06 inline six pattern. AMC phased in the use of the Chrysler Torqueflite for the 1972 model year (both AMC and Jeep vehicles used the Torqueflite with the exception of the Jeep Wagoneer which continued the use of the GM-sourced THM400 until 1979 when it was replaced by the Torqueflite 727 (later the 36RH). | Kaiser Jeeps used a TH400 in the Wagoneer and pickup from 1963-'67. It's the "universal" TH400, which was the Buick Nailhead model. Buick Nailhead engines have a deep flange on the back of the block covering the flexplate/flywheel which require a shallower bellhousing than other GM engines. That shallow bellhousing left room to make an adapter without adding length to the engine/trans, so GM sold it as a "universal" model and continued production a few years after the Nailhead was discontinued. If you get one, make sure you get the 1-1/2" to 2" thick cast iron adapter as well as the flexplate and spacer. The crank will need a pilot bushing to match the flexplate. As stated, a Nailhead TH400 will work if you get just the adapter. Rolls-Royce and Jaguar used the universal TH400, among other smaller makers who didn't need enough units to warrant casting a new case. If using another AMC sourced transmission behind a former Jeep 327 with auto, make sure the thin pilot bushing is removed first. When Kaiser-Jeep became part of American Motors in 1970 (AMC/Jeep) the TH400 bellhousing was switched over to the AMC V8 and 72-06 inline six pattern. AMC phased in the use of the Chrysler Torqueflite for the 1972 model year (both AMC and Jeep vehicles used the Torqueflite with the exception of the Jeep Wagoneer which continued the use of the GM-sourced THM400 until 1979 when it was replaced by the Torqueflite 727 (later the 36RH). | ||
Your Privacy Choices