Body and exterior tips
(→Body filler) |
(→Taping and masking) |
||
| Line 77: | Line 77: | ||
*Remove tape in a slightly outward and downwards motion. This will allow the tape to roll back on itself, preventing jagged edges and lifting. | *Remove tape in a slightly outward and downwards motion. This will allow the tape to roll back on itself, preventing jagged edges and lifting. | ||
*To get tape to stick to rubber, wipe the rubber clean with thinner. | *To get tape to stick to rubber, wipe the rubber clean with thinner. | ||
| − | *To prevent tape marks when taping on fresh paint, try applying the tape to your pants first. It won't stick as much with a thin layer of lint. | + | *To prevent tape marks when taping on fresh paint, try applying the tape to your pants first. It won't stick as much with a thin layer of lint. this allows air under the tape so you don't trap solevent evaporation which causes paint to show tape shadowing or marring. |
==Body filler== | ==Body filler== | ||
Your Privacy Choices