Hot rodding the HEI distributor
(Minor clean up; add link) |
m (→Distributor height adjustment) |
||
| Line 116: | Line 116: | ||
*add a distributor gasket | *add a distributor gasket | ||
*install the hold-down clamp | *install the hold-down clamp | ||
| + | *connect wiring | ||
If there is no up and down movement in the shaft, nylon distributor shims (shown above) need to be added until there is some play. The nylon distributor shim kits are sold through Summit and Jegs, etc. from Moroso, Mr. Gasket, Jegs brand, and others as well. The kits typically contain 0.030", 0.060", and 0.090" or 0.100" (depending on brand) thickness shims. | If there is no up and down movement in the shaft, nylon distributor shims (shown above) need to be added until there is some play. The nylon distributor shim kits are sold through Summit and Jegs, etc. from Moroso, Mr. Gasket, Jegs brand, and others as well. The kits typically contain 0.030", 0.060", and 0.090" or 0.100" (depending on brand) thickness shims. | ||
Your Privacy Choices