Ford C4 transmissions
(→Parking pawl wheel and thrust washer: captions adds) |
m |
||
| Line 35: | Line 35: | ||
| − | [[file:C-4_build_-_04.jpg|frame|none|parking pawl wheel with thrust washer]] | + | [[file:C-4_build_-_04.jpg|frame|none|parking pawl wheel with thrust washer held in place with assembly grease]] |
| Line 47: | Line 47: | ||
This view shows the rear band installed with the apply struts set in place | This view shows the rear band installed with the apply struts set in place | ||
| − | [[file:C-4_build_-_08.jpg]] | + | [[file:C-4_build_-_08.jpg|frame|none| Rear band installed. Low roller clutch visable]] |
This view shows the rear roller clutch and race installed. That is the rollers with accordion style springs that push the rollers towards the race. You set the race in place first. Set the rollers in place next and install the springs last. Watch the spring install as sometimes they like to turn sideways at one end | This view shows the rear roller clutch and race installed. That is the rollers with accordion style springs that push the rollers towards the race. You set the race in place first. Set the rollers in place next and install the springs last. Watch the spring install as sometimes they like to turn sideways at one end | ||
| − | [[file:C-4_build_-_09.jpg]] | + | [[file:C-4_build_-_09.jpg|frame|none| view from top looking at low roller clutch with race installed. Rear band with struts in place]] |
Snap ring installed on the out put shaft. Snap ring sets on top of the rear ring gear before the rear planet is installed.This retains the shaft into the transmission. If the snap ring will not go into the groove, recheck the parts installation to resolve the clearance problem. | Snap ring installed on the out put shaft. Snap ring sets on top of the rear ring gear before the rear planet is installed.This retains the shaft into the transmission. If the snap ring will not go into the groove, recheck the parts installation to resolve the clearance problem. | ||
| Line 75: | Line 75: | ||
| − | Photo below Shows front planetary with matching ring gear. Ring gear has fresh | + | Photo below Shows front planetary with matching ring gear. Ring gear has fresh bushing installed |
[[File:C-4_build_-_18.jpg|none|frame |Front planet with ring gear]] | [[File:C-4_build_-_18.jpg|none|frame |Front planet with ring gear]] | ||
Your Privacy Choices