Choosing a stall converter

Jump to: navigation, search
Line 3: Line 3:
 
  I may be not-the-best person to attempt this, but until someone better takes a stab at it, here I go: If you have
 
  I may be not-the-best person to attempt this, but until someone better takes a stab at it, here I go: If you have
 
  an automatic transmission, then you don't have a clutch pedal. You have a torque converter instead.
 
  an automatic transmission, then you don't have a clutch pedal. You have a torque converter instead.
  Most of my experience is with V8s, so that's the focus here. Let's start with the "stall".
+
  Most of my experience is with V8s, so that's the focus here. Let's start with the "stall". Drive your car to a deserted road, stop, watch the tach, and stand on the gas very abruptly.  
Drive your car to a deserted road, stop, watch the tach, and stand on the gas very abruptly.  
+
 
Assuming everything is functioning normally, the tach will jump, to at least 1200 RPM, before the car actually
 
Assuming everything is functioning normally, the tach will jump, to at least 1200 RPM, before the car actually
 
begins to jump forward. Or the tires go up in smoke, depending on your combo.
 
begins to jump forward. Or the tires go up in smoke, depending on your combo.

Revision as of 19:38, 22 December 2011

Personal tools
Namespaces
Variants
Actions
Navigation
Categories
Toolbox