Finding vacuum leaks

Jump to: navigation, search

@@ Line 1: / Line 1: @@
-{{youcanedit}}
+saqnrvirefok http://pyelohutgo.livejournal.com/655.html
-There are several methods for locating vacuum leaks. Occasionally, you may experience a vacuum leak into the intake ports from the crankcase of the motor due to the intake manifold / cylinder head interface not being machined parallel. No amount of propane or carburetor cleaner will find such a leak. The best way is to insure the elimination of such a problem while building the motor. See the wiki article: [[Manifold/Head vacuum leak, internal]].
+<a href="http://pyelohutgo.livejournal.com/655.html">saqnrvirefok</a>
+[url=http://pyelohutgo.livejournal.com/655.html]saqnrvirefok[/url]
-=Propane method=
+[link=http://pyelohutgo.livejournal.com/655.html]saqnrvirefok[/link]
+requabocenace http://monpmcen.livejournal.com/898.html
-#Get a soldering propane tank and valve attachment.
+<a href="http://monpmcen.livejournal.com/898.html">requabocenace</a>
-#Unscrew the end of it so you have a threaded pipe without the nozzle.
+[url=http://monpmcen.livejournal.com/898.html]requabocenace[/url]
-#Attach a 2 foot piece of hose to the end.
+[link=http://monpmcen.livejournal.com/898.html]requabocenace[/link]
-#Start the engine and let it warm up a bit.
+elriczarnr http://sofelfqet.livejournal.com/997.html
-#Turn on the propane and run the hose all around the vacuum lines and the bottom of the carb.
+<a href="http://sofelfqet.livejournal.com/997.html">elriczarnr</a>
-#If the engine smooths out or revs up a bit, you have found your leak.
+[url=http://sofelfqet.livejournal.com/997.html]elriczarnr[/url]
+[link=http://sofelfqet.livejournal.com/997.html]elriczarnr[/link]
-Hold bottle UPRIGHT during testing as liquid propane may run out of an inverted bottle.
+rosabasgetm http://adelodebeg.livejournal.com/1294.html
+<a href="http://adelodebeg.livejournal.com/1294.html">rosabasgetm</a>
-PLEASE do this in a well ventilated area due to propane gas and exhaust fumes!!
+[url=http://adelodebeg.livejournal.com/1294.html]rosabasgetm[/url]
+[link=http://adelodebeg.livejournal.com/1294.html]rosabasgetm[/link]
-=Carburetor cleaner method=
+kobocdebcahe http://jenneafafual.livejournal.com/774.html
-#With the car running, using a can of carburetor cleaner spray down the hoses and vacuum connections.
+<a href="http://jenneafafual.livejournal.com/774.html">kobocdebcahe</a>
-#Notice a change in the running of the engine and you might have found your leak.
+[url=http://jenneafafual.livejournal.com/774.html]kobocdebcahe[/url]
+[link=http://jenneafafual.livejournal.com/774.html]kobocdebcahe[/link]
-[[Category:Engine]]

Finding vacuum leaks

Revision as of 19:29, 21 April 2009

Personal tools

Namespaces

Variants

Views

Actions

Search

Navigation

Categories

Toolbox