Camshaft install tips and tricks

Jump to: navigation, search
(Engine RPM for break in)
(Mistakes that may "frag" a flat-tappet camshaft and lifters)
Line 3: Line 3:
 
{{!}}Use this list as a guideline so that you remember to check all these things when installing a new flat tappet camshaft. This list is not gospel, and if the manufacturer of the camshaft you're using recommends procedures that differ from what is shown here, use the manufacturer's recommendations instead.
 
{{!}}Use this list as a guideline so that you remember to check all these things when installing a new flat tappet camshaft. This list is not gospel, and if the manufacturer of the camshaft you're using recommends procedures that differ from what is shown here, use the manufacturer's recommendations instead.
  
==Mistakes that may "frag" a flat-tappet camshaft and lifters==
+
==Mistakes that may cause failure of a flat-tappet camshaft and lifters ==
  
 
===Cleaning===
 
===Cleaning===
Line 131: Line 131:
  
 
'''19. Failure to observe the lifters and pushrods turning with the motor running.'''
 
'''19. Failure to observe the lifters and pushrods turning with the motor running.'''
If the lifter is not turning, the cam lobe is hitting on the same spot on the lifter every revolution and it won't be long until the lifter yields and then takes the lobe out with it. All lifters and all pushrods must be turning for successful engine operation.  
+
If the lifter is not turning, the cam lobe is hitting on the same spot on the lifter every revolution and it won't be long until the lifter yields and then takes the lobe out with it. All lifters and all pushrods must be turning for successful engine operation.
+
  
 
==Lubrication==
 
==Lubrication==

Revision as of 15:17, 9 April 2015

Personal tools
Namespaces
Variants
Actions
Navigation
Categories
Toolbox