Ford 144-250 inline 6 high performance building
From Crankshaft Coalition Wiki
(→Heads) |
(→Heads) |
||
Line 1: | Line 1: | ||
− | + | ||
==Preface== | ==Preface== | ||
You need to first determine what the final results are desired for the inline 6 engine build. | You need to first determine what the final results are desired for the inline 6 engine build. | ||
Line 13: | Line 13: | ||
==Heads== | ==Heads== | ||
− | When working on the cylinder heads on the older engines (1960-'68) the 1960-'68 heads do not flow well. Replacement 1969-up heads are better, particularly casting numbers D8 and E0 heads, which would come in 1979-'83 model years. These heads have 1.75" intake/1.36" exhaust valve sizes. The exhaust valve seat can be machined to 1.5". The drawback to these heads is the chamber size is 62cc, 1960-'68 heads are 52cc, so compression drops approximately 1 point. There are also Australian cylinder heads with removable intake manifolds, but they are expensive. There was an aftermarket aluminum head | + | When working on the cylinder heads on the older engines (1960-'68) the 1960-'68 heads do not flow well. Replacement 1969-up heads are better, particularly casting numbers D8 and E0 heads, which would come in 1979-'83 model years. These heads have 1.75" intake/1.36" exhaust valve sizes. The exhaust valve seat can be machined to 1.5". The drawback to these heads is the chamber size is 62cc, 1960-'68 heads are 52cc, so compression drops approximately 1 point. There are also Australian cylinder heads with removable intake manifolds, but they are expensive. There was an aftermarket aluminum head From Matt Cox at Vintage Inlines. |
Line 31: | Line 31: | ||
− | If you would like to know more on the topic of 200ci cylinder heads and how they all stack up against each other I would suggest visiting the classic inlines tech | + | If you would like to know more on the topic of 200ci cylinder heads and how they all stack up against each other I would suggest visiting the classic inlines tech archives which has everything you would ever want to know. (linked below). |
https://fordsix.com/archive/www.classicinlines.com/Tech.html | https://fordsix.com/archive/www.classicinlines.com/Tech.html | ||
Line 98: | Line 98: | ||
==Resources== | ==Resources== | ||
− | |||
*[[Six cylinder inline (other than GM) parts and info sites]] | *[[Six cylinder inline (other than GM) parts and info sites]] | ||
− | + | ||
− | + | ||
[[Category:Engine]] | [[Category:Engine]] | ||
[[Category:Ford]] | [[Category:Ford]] |