Vortec L31 cylinder head
(Add link; minor clean up) |
(Add links) |
||
| Line 101: | Line 101: | ||
When retaining the factory boss and seals, be sure the valve seals are driven on all the way. You need to check that they are before installing this kit. Use a 3/8” drive 1/2” socket and a soft mallet to gently drive the seals fully home. | When retaining the factory boss and seals, be sure the valve seals are driven on all the way. You need to check that they are before installing this kit. Use a 3/8” drive 1/2” socket and a soft mallet to gently drive the seals fully home. | ||
| − | + | ;Also see<nowiki>:</nowiki> | |
| + | *[http://www.thirdgen.org/techboard/tech-general-engine/542295-ls6-valvetrain-vortec-heads.html LS6 Valvetrain on vortec heads] | ||
| + | *[http://www.thirdgen.org/techboard/tech-general-engine/562935-rework-vortec-heads.html Vortec valvetrain mods] | ||
| + | |||
==Spring seat== | ==Spring seat== | ||
Use reduced hex head bolts or 12 point fasteners to give more clearance if a larger seat like for a 1.44" OD spring is used. | Use reduced hex head bolts or 12 point fasteners to give more clearance if a larger seat like for a 1.44" OD spring is used. | ||
Your Privacy Choices