Editing The Worth of Appropriately Waxing and Tuning Your Ski and Snowboard
Jump to:
navigation
,
search
[https://www.youtube.com/watch?v=cCT8OfGJHSk law of seed] The better your equipment is working, the more you'll be able to improve your performance, and the safer you'll be. On the other hand, you may be someone who doesn't want to think much about your gear, but who just wants to ski or board down a mountain when you feel like it. Let's look at some useful techniques for waxing and tuning your skis and snowboards. It's important that your skis or snowboard are warmed up before you work on them, so bring them inside for a while before you do any waxing. Working on your gear will be much harder if you bring it in from the cold and don't let it warm up. The base of your skis will end up with bubbles if you start waxing them while they're still cold, for example. This is the kind of result that you definitely don't want. You have to consider the kind of wax you're using so you set your wax iron to the right temperature before you begin the application. The iron has to be hot enough to properly melt the wax, but if it's too hot, the wax can start smoking, which should be avoided. When you're ready to edge your skis, then you'll want to consult the recommended edge angle supplied by the manufacturer. Skiers who have been doing this for a while, of course, develop their own preferences in this regard. Unless you are confident in your own judgment, however, it's best to do what the company suggests. You'll find variations in edge angle of about 1-3 degrees. In addition to a file, some people also use a file guide to make it easier. A file guide can make your job easier, though experts can do without it. After filing the edges, then you will do it over with a diamond stone. If the diamond stone is a little damp before you use it, it will work better. Sometimes the snow under your skis or board just doesn't cooperate when you get out there, and you want to be ready for this. If you've experienced this, you know how frustrating it can be. You can wax on the spot if you're ready with a bar of base wax. Certain kinds of ice will cause the wax to fall right off the base of your skis or board. So, not to worry, as you can do a quick wax rub-down on your bases and be good to go. This really works, so give it a try. We recommend an all-purpose wax that has fluorine in it. What's so special about fluorine? This substance gives the wax the slick quality you want. The fluorine in the wax is what helps the ski from sticking to the snow. This makes sense if you want to stay in motion. You'll find that if you learn how to properly tune and wax your skis and snowboards, your equipment will last much longer. Proper care also is a great and smart idea for safety concerns plus your performance will increase. Therefore you should always sidestep ignorance of your winter sports equipment. <a href="http://www.michaelhigginsblog.com/wayne-lynch-man-of-freedom/ ">http://www.michaelhigginsblog.com/wayne-lynch-man-of-freedom/ </a>
|
Editing help
(opens in new window)
Personal tools
Log in / create account
Namespaces
Page
Discussion
Variants
Views
Read
Edit
View history
Actions
Search
Navigation
Main Page
Recent changes
Random page
Help
All articles
Start a new article
Hotrodders forum
Categories
Best articles
Body and exterior
Brakes
Cooling
Electrical
Engine
Fasteners
Frame
Garage and shop
General hotrodding
Identification and decoding
Interior
Rearend
Safety
Steering
Suspension
Tires
Tools
Transmission
Troubleshooting
Wheels
Toolbox
What links here
Related changes
Special pages
Terms of Use
Copyright
Privacy Policy
Your Privacy Choices
Manage Consent