Editing Relay application guide

{{Develop1}}

==Mounting a relay==
Many relays are molded w/a screw hole/mount already on it (first image, below).

If you have one like in the second image, the small metal bracket is slipped into the slot to mount it. In some cases the "main" mounting bracket is made w/the relay mounting bracket already in place (this would be the fusebox in your case), ready for the relay to be slid into place. If no provisions are there to mount your relay to the fusebox, you'll have to improvise or see if the small mounts are available separately. The small brackets can be bent as needed to mount the relay.

[[File:Relay1.JPG]]

[[File:Relay2.jpg]]

==Bosch relay application guide==
This '''[http://www.dlcparts.com/images/BoschGuide.pdf Relay Applications Guide]''' PDF file shows projects with wiring diagrams using Bosch relays to control electrical circuits in automobile applications.

==Resources==
*[http://www.danielsternlighting.com/home.html Daniel Stern's excellent page on headlight relays, voltage drop, etc.]
*[http://www.teamrocs.com/technical/pages/relay_basics.htm Relay basics] from teamrocs.com
*[http://www.classictruckshop.com/clubs/earlyburbs/projects/bosch/relay.htm The Bosch Relay Unraveled]
*[http://www.the12volt.com/relays/relaydiagrams.asp Relay circuit diagrams, many]
*[http://www.archtoolbox.com/representation/abbreviations/99-electabbrev.html Electrical abbreviations] from archtoolbox
<br>
;Crankshaft Coalition wiki articles
*[[Troubleshooting electrical problems]]
*[[Understanding the math of electrical loads]]
*[[Wiring diagrams]]
*[[Remote Ford solenoid for GM- no hot start]]
*[[Automotive wiring 101]]
*[[How to solder electrical connections]]

[[Category:Electrical]]
[[Category:Troubleshooting]]