Talk:How to run Ford wheels on a Chevy wheel pattern

Jump to: navigation, search
(Wheel Bolt Guage - a must have tool. - GM Compact J Body, H Body platforms)
Line 1: Line 1:
 
{{Note1}}{{Sign2}}
 
{{Note1}}{{Sign2}}
 +
 +
I placed this in the discussion side for the moderator to review and add to the main article if it's warranted.
 +
 +
== THE WHEEL BOLT CIRCLE GAGE – A must have item for the serious builder. ==
 +
 +
Often over looked, until you have the “I Need it Now” type answer” scenario, is the humble wheel bolt pattern gauge.  I have worked with several different types over the years and by far the most cumbersome was the one that comes with the gauges on a large plastic ring.  It comes as a kit and has two separate rings, one is USA SAE sizes in Inches, and the other is Metric, and the kit is expensive.
 +
 +
The best one I have found and now stays in my toolbox is the one outlined below.  This gauge is available from Jegs (www.jegs.com) for less than $20.00 (shipping included).
 +
 +
The tool works like a typical measuring caliper and works for SAE and Metric, And 4, 5, 6 and 8 Bolt Rims.  You place the points in the holes of the rims and read the corresponding chart on the tool. Or, you can place the flat pegs over the tips of the bolts and read the supplied chart.  The chart stays affixed to the tool, so you don’t have some book or reference chart to read.  Everything is self-contained and after using it a couple of times, you will see how beneficial this tool is.
 +
 +
Supplier: Jegs, (www.jegs.com)
 +
Part Number: 555-80850
 +
Price: 12.99 + shipping (approx. $5.00) = Less than $20.00
 +
 +
[[File:Jegs Bolt Gage  Pic1.jpg]]
 +
[[File:Jegs Bolt Gage  Pic2.jpg]]
 +
[[File:Jegs Bolt Gage  Pic3.jpg]]
 +
[[File:Jegs Bolt Gage  Pic4.jpg]]
 +
 +
[[File:Jegs 80850 Pic1.jpg]]
 +
 +
 +
  
 
== GM Compact J Body, H Body platforms ==
 
== GM Compact J Body, H Body platforms ==

Revision as of 17:58, 21 July 2016

Personal tools
Namespaces
Variants
Actions
Navigation
Categories
Toolbox