Hotrodding the BBC 454 engine
From Crankshaft Coalition Wiki
m (moved Hotrodding 454 engines to Hotrodding the BBC 454 engine) |
(Add links) |
||
| Line 13: | Line 13: | ||
None of the "closed" chamber heads had hardened exhaust seats needed for unleaded gasoline, and these heads are coveted, plus the production numbers were far less than the peanut ports. | None of the "closed" chamber heads had hardened exhaust seats needed for unleaded gasoline, and these heads are coveted, plus the production numbers were far less than the peanut ports. | ||
| + | ==Static CR== | ||
| + | *[http://www.wheelspin.net/calc/calc2.html SCR] | ||
| + | |||
| + | ==Dynamic CR== | ||
| + | *[http://www.wallaceracing.com/dynamic-cr.php Wallace Racing DCR calculator] | ||
| + | *[http://www.empirenet.com/pkelley2/DynamicCR.html Kelly DCR calculator] | ||
| + | *[http://www.uempistons.com/calc.php?action=comp2 KB/Silvolite DCR calculator] | ||
| + | *[http://www.rbracing-rsr.com/comprAdvHD.htm RSR DCR calculator] | ||
| + | {{Note1}} Some dynamic compression rtatio calculators (like KBs) ask for an additional 15 degrees of duration be added to the IVC @ 0.050" lift point figure. This works OK on older, slower ramped cam lobes, but the faster lobe profiles may need to have 25 degrees or more added to be accurate. | ||
| + | |||
| + | {{Note1}}If the intake valve closing (IVC) point isn't known, it can be calculated: | ||
| + | # Divide the intake duration by 2 | ||
| + | # Add the results to the lobe separation angle (LSA) | ||
| + | # Subtract any ground-in advance | ||
| + | # Subtract 180 | ||
| + | This result does not need to have any amount added to the IVC point, like the KB calculator calls for. | ||
| + | |||
==References== | ==References== | ||
| − | [http://www.carcraft.com/techarticles/ccrp_1010_cheap_big_block_chevy_engine_build/index.html Car Craft 454 build] baselined with peanut port heads, 446 hp at 4,900 rpm and 542 lb-ft at 3,600 rpm | + | [http://www.carcraft.com/techarticles/ccrp_1010_cheap_big_block_chevy_engine_build/index.html Car Craft 454 build] baselined with peanut port heads, 446 hp at 4,900 rpm and 542 lb-ft at 3,600 rpm. |
| + | <br><br> | ||
[[Category:Engine]] | [[Category:Engine]] | ||
Your Privacy Choices