Dynamic compression ratio

Jump to: navigation, search

@@ Line 5: / Line 5: @@
 *[http://www.empirenet.com/pkelley2/DynamicCR.html Kelly DCR calculator]
 *[http://www.kb-silvolite.com/calc.php?action=comp2 KB/Silvolite DCR calculator]
+*[http://www.rbracing-rsr.com/comprAdvHD.htm RSR DCR calculator]
-If the intake closing (IC) point isn't known, it can be calculated by dividing the intake duration by 2, add that to the lobe separation angle (LSA). Then subtract any ground-in advance. Finally, subtract 180. This result does not need to have any amount added, like the KB calculator calls for.
+{{Note1}}If the intake closing (IC) point isn't known, it can be calculated:
+# Divide the intake duration by 2
+# Add the results to the lobe separation angle (LSA)
+# Subtract any ground-in advance
+# Subtract 180
+This result does not need to have any amount added, like the KB calculator calls for.
 ==DCR and pump gasoline==

Revision as of 19:55, 4 December 2012