Automotive wiring 101

From Crankshaft Coalition Wiki
Jump to: navigation, search
(→Resources)
(→Circuits)
 
Line 8: Line 8:
  
 
===Types of wires/applications===
 
===Types of wires/applications===
 +
 +
*[http://www.wirebarn.com/Wire-Selection-Guide-_ep_29.html Wire Selection Guide]
  
 
====Copper====
 
====Copper====
Line 21: Line 23:
  
 
====Ratings====
 
====Ratings====
 +
 +
*[http://www.wirebarn.com/Wire-Calculator_ep_41.html Wire Size Calculators]
 +
 +
*[http://www.calculator.net/voltage-drop-calculator.html?material=copper&wiresize=2.061&voltage=13.8&phase=dc&noofconductor=1&distance=10&distanceunit=feet&amperes=23&x=55&y=16 Voltage Drop Calculator]
  
 
==Tools==
 
==Tools==
Line 30: Line 36:
  
 
==Terminals and connectors==
 
==Terminals and connectors==
 +
 +
===OEM terminals and connectors===
 +
OEM type hardware can be sourced from a junkyard. Use proper splicing techniques if going this route.
 +
 +
These OEM connectors are also available in the aftermarket. One such place is [http://www.repairconnector.com/ The Repair Connector Store]
 
      
 
      
 
===Crimped type===
 
===Crimped type===
Line 54: Line 65:
 
==Switches / Relays / Sockets==
 
==Switches / Relays / Sockets==
  
−
===Mounts / Isolators===
+
*[http://www.colehersee.com/home/catalogs/ Catalogs]
  
 
==Circuits==
 
==Circuits==
 +
 +
Individual circuits fall into one or more of the following categories:
 +
 +
1. Branch circuits. These supply power to a single device or system. This will be most of your harness (but not all) and includes most of what everyone thinks of when you say 'wiring'.
 +
 +
2. Feeder circuits. These supply power to multiple branch circuits and/or have combined loads on them. These can include the wiring from your battery to a fuse panel or a switch, or the power wire out of your generator/alternator to the battery. These can also be a power wire supplying a circuit that has multiple devices/loads connected to it.
 +
 +
3. Continuous loads. These are all the circuits that if you turn them on, can be on for an extended period or will be on anytime the vehicle is running; most lights, ignition, radio, heater, and so forth.
 +
 +
4. Intermittent loads. This will generally be power accessories like power windows, locks, seats, etc but can include any load that will be usually on for short periods of time (like under one minute).
 +
 +
A feeder circuit will almost always be a continuous load, but a branch circuit could be either. The reason for splitting the branch circuits into two types is so we can apply a concept known as 'diversity' when figuring feeder loads. This is based on the idea that not everything will be operating at once.
 +
 +
 +
Before you start running circuits, it is best to know how much amperage each one of those accessories will take to power it up. Keep in mind there are four types of accessories we will be dealing with; un-switched continuous, un-switched intermittent, switched continuous, and switched intermittent.
 +
 +
To follow this through, let’s look at a typical 1960/70 automobile and see what kind of amperage we are dealing with and how they relate to the design of an automotive electrical system:
 +
 +
 +
 +
1. Headlights. There’s four, and when on high beam the 'typical' amps each is 5A for a total of 20A.
 +
 +
2. Taillights. There’s four and at .7 amps each , plus the license plate light, =3.5A.
 +
 +
3. Brake lights. Four @ 2.25 each, = 9A.
 +
 +
4. Dash lights. Four @ .3A each, =1.2A.
 +
 +
5. Emergency flashers. When your flashing, the four brake lights at 2.25A each, two dash indicator lights at .3A each, plus front turn lights at 2.25 each, =14.1A.
 +
 +
6. Interior lights. One overhead light and two door sill lights, =1.8A.
 +
 +
7. Back-up lights. Two at 2.25A, =4.5A.
 +
 +
8. Lighter. 16A if you actually have a lighter, even if used as a power-point, = 16A
 +
 +
9. Horns. Two at 6A each, =12A.
 +
 +
These add a total of 82.1 amps. These are not all continuous, so you don't need 81 amps all the time. Your continuous loads are only items 1, 2, and 4 as a general rule, so the continuous load is only 35.5 amps, less than half.
 +
 +
To calculate for switched circuits:
 +
1. Ignition, 12A.
 +
 +
2. Wipers, 6A.
 +
 +
3. Turn signals, 7A.
 +
 +
4. Heater/AC, 24A.
 +
 +
5. Gauges, 4A.
 +
 +
6. Radio, 7A.
 +
 +
7. Power seat, 16A.
 +
 +
8. Power windows, 16A.
 +
 +
The total load equals 92 amps, but your continuous load is lower. Items 1, 2, 4, 5, 6 are continuous and total 53 amps.
 +
 +
Just adding up 'basic' continuous loads (35.5 and 53), equals 88.5 amps for total continuous load. This number represents how many amps your charging system needs to put out just to stay even, so as not to create a draw on your reserve, the battery. Normally, for sizing the charging system, the intermittent loads won't count; you draw off the battery and then the charging system will replace the power as you drive.
 +
 +
As you advance your ride with the latest electronic features, you have to take into account the extra power that the electrical system must generate to keep up with your accessories. Perhaps, that new electric fuel pump and twin fan setup will become the cause of the dreaded ‘Dead Battery Syndrome’ that is plaguing the automotive scene today. The old 63 amp GM alternator will be tossed for a 140 or even 200 amp alternator in order to run that giga watt stereo system that you’re cruising with today. Do your homework and build your electrical system right!
 +
 +
  
 
===Grounding===
 
===Grounding===
−
Many of the functions on a vehicle are electrical, which requires a way for the current to get from the battery to the load and then another way for it to get from the load back to the battery. Oftentimes, fellows will be chasing around trying to find a problem when the real problem is the lack of proper grounding in the vehicle.  
+
Many of the functions on a vehicle are electrical, which requires a way for the current to get from the battery to the load and then another way for it to get from the load back to the battery. Often times, fellows will be chasing around trying to find a problem when the real problem is the lack of proper grounding in the vehicle.  
  
 
A framed car gets a line from the negative battery terminal to the motor, motor to frame and frame to body (3 separate cables). A unibody car gets a line from the negative battery to the motor and motor to body (2 separate cables).
 
A framed car gets a line from the negative battery terminal to the motor, motor to frame and frame to body (3 separate cables). A unibody car gets a line from the negative battery to the motor and motor to body (2 separate cables).
Line 84: Line 159:
 
===Starters===
 
===Starters===
 
See: [[Starter motors]] for more.
 
See: [[Starter motors]] for more.
 +
 +
===Suppliers===
 +
*[http://www.keepitcleanwiring.com Cloth Wrapped Wire Harness Kits]
 +
*[http://www.johnnylawmotors.com Wire Kits]
  
 
==Resources==
 
==Resources==
−
*[http://www.archtoolbox.com/representation/abbreviations/99-electabbrev.html Electrical abreviations] from archtoolbox.com
+
*[http://www.danielsternlighting.com/home.html Daniel Stern's excellent page on headlight relays, voltage drop, etc.]
 +
*[http://www.archtoolbox.com/representation/abbreviations/99-electabbrev.html Electrical abbreviations] from archtoolbox.com
 
*[http://www.vernco.com/Sparks/id606.htm Voltage drop test]
 
*[http://www.vernco.com/Sparks/id606.htm Voltage drop test]
  
Line 95: Line 175:
 
**[[Wiring diagrams]]
 
**[[Wiring diagrams]]
 
**[[Remote Ford solenoid for GM- no hot start]]
 
**[[Remote Ford solenoid for GM- no hot start]]
−
**[[Relay application guide- Bosch relays]]
+
**[[Relay application guide]]
 
**[[How to solder electrical connections]]
 
**[[How to solder electrical connections]]
−
 
−
 
  
 
[[Category:Electrical]]
 
[[Category:Electrical]]
 
[[Category:Ignition]]
 
[[Category:Ignition]]
 
[[Category:Undeveloped articles]]
 
[[Category:Undeveloped articles]]
−
[[Undeveloped Electrical articles]]
+
[[Category:Undeveloped Electrical articles]]
 +
[[Category:Undeveloped Ignition articles]]

Latest revision as of 14:17, 19 September 2014

Retrieved from "https://www.crankshaftcoalition.com/wiki/index.php?title=Automotive_wiring_101&oldid=617017"
Personal tools
Namespaces
Variants
Actions
Navigation
Categories
Toolbox
 
Terms of Use
Copyright
Privacy Policy