TH350 rebuild tech

Jump to: navigation, search
(1-2 accumulator: minor cleanup; add text)
Line 189: Line 189:
 
Next you will install the direct piston lip seals, and install the piston in the drum. Take note of the orientation of the seals, the lip will face towards the "oil" side of the piston, not the clutch side.
 
Next you will install the direct piston lip seals, and install the piston in the drum. Take note of the orientation of the seals, the lip will face towards the "oil" side of the piston, not the clutch side.
  
Below is a high performance TH350 and no lip seal in the drum that would separate the two halves of the direct piston.
+
Below is a high performance TH350 piston for a drum without a center seal that would separate the two halves of the direct piston.
  
 
[[File:TH350directpistonseals1.jpg|thumb|300px|left|Direct piston with lip seals installed]] <br style="clear:both"/>
 
[[File:TH350directpistonseals1.jpg|thumb|300px|left|Direct piston with lip seals installed]] <br style="clear:both"/>

Revision as of 18:35, 14 April 2015

Personal tools
Namespaces
Variants
Actions
Navigation
Categories
Toolbox