Rust

Jump to: navigation, search

@@ Line 391: / Line 391: @@
 -------------------------
-===Step-by-step epoxy primer application to panels===
-#strip, and sand with 80-grit sandpaper
-#clean with wax and grease remover until a clean towel can be rubbed on it without discoloring
-#spray 2 coats of epoxy, according to manufacturer's directions
-#body filler can be applied next, although sometimes the epoxy will need to be scuffed or sanded (read instructions)
-#when the filler work is done, scuff the whole panel with a red scotch-brite pad.
-#then, apply two more coats of epoxy, followed by high-build primer.

Revision as of 18:47, 13 July 2007