The FREE T Bucket plans
(→Steering assembly) |
(→Bracing and mounting the Body) |
||
| Line 138: | Line 138: | ||
You'll want a nice 5/8-3/4" piece of plywood cut to fit the firewall of your roadster on the inside. This gives you a nice solid mounting surface for your electrics (fuse box, relays, etc.) and accelerator pedal. | You'll want a nice 5/8-3/4" piece of plywood cut to fit the firewall of your roadster on the inside. This gives you a nice solid mounting surface for your electrics (fuse box, relays, etc.) and accelerator pedal. | ||
| − | You may want to run a stringer of wood just inside the lower rocker panel where the body drops over the frame as a stiffener." Excerpt from soon-to-be-released bucket book by Pasadenahotrod | + | You may want to run a stringer of wood just inside the lower rocker panel where the body drops over the frame as a stiffener." Excerpt from soon-to-be-released bucket book by Pasadenahotrod who is hijacking this wiki info for personnel profit! |
==Hinge Fabrication== | ==Hinge Fabrication== | ||
Your Privacy Choices