Removing a 60's Ford headlight switch
From Crankshaft Coalition Wiki
| Line 7: | Line 7: | ||
*The retaining nut has either 2 or 4 recesses like a Philips screw. Usually a flat blade screw driver the right width will work to unscrew the nut. | *The retaining nut has either 2 or 4 recesses like a Philips screw. Usually a flat blade screw driver the right width will work to unscrew the nut. | ||
*Unclip the harness and install your new switch with the special bezel nut. | *Unclip the harness and install your new switch with the special bezel nut. | ||
| − | *When you reinstall the knob shaft YOU | + | *When you reinstall the knob shaft YOU M |
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
Your Privacy Choices