Freeing a stuck engine
m (Reverted edits by 86.149.190.193 (talk) to last revision by Cobalt327) |
(→Using penetrating fluids) |
||
| Line 99: | Line 99: | ||
<br style="clear: both"/> | <br style="clear: both"/> | ||
*Don't forget to use longitudinal force on the crankshaft. Tap the crankshaft at both ends with your dead blow hammer and oak block, like you were going to measure the crank end float. Loosen the rod bearing caps and tap with a bronze hammer to break the bearings loose. | *Don't forget to use longitudinal force on the crankshaft. Tap the crankshaft at both ends with your dead blow hammer and oak block, like you were going to measure the crank end float. Loosen the rod bearing caps and tap with a bronze hammer to break the bearings loose. | ||
| − | *After you've done all of the above, let it soak and then start over again. | + | *After you've done all of the above, let it soak and then start over again. |
===Miscellaneous=== | ===Miscellaneous=== | ||
Your Privacy Choices