Thermostats explained

Jump to: navigation, search
(Format, add photos.)
m (The attached article reads as follows:: minor clean up)
Line 13: Line 13:
 
'''Thermostats'''
 
'''Thermostats'''
  
The thermostat has two important jobs to perform; to accelerate engine warm-up and to regulate the engine's operating temperature. A quality thermostat ensures excellent fuel economy, reduces engine wear, diminishes emissions and blow-by, improves cold weather drivability, provides adequate heater output, and detours overheating. This is accomplished by blocking the circulation of coolant between the engine and radiator until the engine has reached its predetermined temperature. The thermostat then opens as required in response to changes in coolant temperature to keep the engine's temperature within the desired operating range.   
+
The thermostat has two important jobs to perform; to accelerate engine warm-up and to regulate the engine's operating temperature. A quality thermostat ensures excellent fuel economy, reduces engine wear, diminishes emissions and blow-by, improves cold weather drivability, provides adequate heater output, and can help prevent overheating. This is accomplished by blocking the circulation of coolant between the engine and radiator until the engine has reached its predetermined temperature. The thermostat then opens as required in response to changes in coolant temperature to keep the engine's temperature within the desired operating range.   
  
 
Thermostats have a “rated” temperature such as 180F or 195F. This is the temperature the thermostat will start to open, give or take 3 degrees.
 
Thermostats have a “rated” temperature such as 180F or 195F. This is the temperature the thermostat will start to open, give or take 3 degrees.
Line 63: Line 63:
 
*Torque the thermostat housing bolts evenly and to the manufacturer's recommendations.
 
*Torque the thermostat housing bolts evenly and to the manufacturer's recommendations.
 
*To insure air has been removed from the cooling system after replacing a thermostat, be sure to run the engine a few minutes, let it cool, and refill the antifreeze as needed.
 
*To insure air has been removed from the cooling system after replacing a thermostat, be sure to run the engine a few minutes, let it cool, and refill the antifreeze as needed.
 
  
 
==References==
 
==References==

Revision as of 11:14, 26 November 2012

Personal tools
Namespaces
Variants
Actions
Navigation
Categories
Toolbox