Pilot bearing and bushings
(Interim save.) |
|||
| Line 76: | Line 76: | ||
To remove, install tool J-1448 and remove bearing from crankshaft. In replacing this bearing, use tool J-1522. Place bearing on pilot of tool with radius in bore of bearing next to shoulder on tool and drive into crankshaft. Lubricate with several drops of machine oil. | To remove, install tool J-1448 and remove bearing from crankshaft. In replacing this bearing, use tool J-1522. Place bearing on pilot of tool with radius in bore of bearing next to shoulder on tool and drive into crankshaft. Lubricate with several drops of machine oil. | ||
| − | + | {{MrTsezEDITFOOL}} | |
[[Category:Transmission]] | [[Category:Transmission]] | ||
[[Category:Good articles]] | [[Category:Good articles]] | ||
Your Privacy Choices