Building a GMC 702 V-12
(→Dual Feed Pump Mod) |
(→Dual Feed Pump Mod) |
||
| Line 68: | Line 68: | ||
[[File:Parts for pu.jpg]] | [[File:Parts for pu.jpg]] | ||
| + | |||
| + | |||
| + | These are the largest AN fittings sold by Summit, I would have to look up the order but I think they are AN-16. I had to modify the intake side of the check valve to keep it from protruding past the bottom of the strainer. | ||
| + | |||
| + | [[File:PU assembled.jpg]] | ||
| + | |||
| + | If you look carefully you can see the original tube behind the bottom feed assembly. This is, with screen strainer too, nestled snugly into the oil pan. I did have to "custom form" the baffle in the bottom of the pan but not too bad. | ||
| + | |||
| + | There you have it... a dual feed gerotor for the V-12. BTW any of the GMC gerotors with the 1.37" tall rotor will have the cavitation problem..... | ||
| + | |||
| + | [[File:Insode PU.jpg]] | ||
| + | |||
| + | Next, a trip thru GM automotive history as I try to get "new" lifters together... | ||
| + | |||
| + | |||
| + | == Hydraulic Tappets == | ||
Your Privacy Choices