Trouble shooting 85 chevy factory tach

From Crankshaft Coalition Wiki

Jump to: navigation, search

@@ Line 1: / Line 1: @@
-{{Note1}}{{Sign2}}
-chevy camaro factory tachometer , when running tac goes to 7000 rpm at idle . wiring looks to be correct. customer is running a super coil, will this effect the signal for the tach. If so is there a solution to fix this issue.
-:I believe the problem ''may'' revolve around the factory installed electrical choke used in the tach circuit. In the meantime the tach wire should be connected to the coil "-" (negative) terminal.
-:Please see the info on the [http://www.crankshaftcoalition.com/wiki/Crankshaft_Coalition_Wiki Main page] regarding the wiki vs. the Hotrodders forum. The forum is where you need to post specific questions if you cannot find the answer here, and unfortunately I don't recall seeing anything about this in this wiki.
-:Thanks, [[User:Cobalt327|Cobalt327]] 10:22, 18 November 2013 (MST)
-Sorry first time posting  --[[User:Swampthing32|Swampthing32]] 11:15, 18 November 2013 (MST)

Latest revision as of 08:01, 31 December 2024