First paint job

From Crankshaft Coalition Wiki

Jump to: navigation, search

@@ Line 1: / Line 1: @@
-[[Image:Mr-T-1.jpg|center]]
-== Introduction ==
-You finally get that project all welded, filled in, and primered, now you want to get a nice beautiful coat of paint on it to complete it. You say, "I havn't ever painted anything before with a REAL spray gun and paint!" You ask yourself, "How am I going to do this?", but you will find out in this article how to do it all yourself. You will learn basic techniques and how to use different paints and equipment.
-== General Tips, Tricks, and Techniques ==
-With any spray gun, you get what you pay for! Its best to rent one if your not going to do several cars.
-== Spray gun Tech ==
-== Choosing the right type of paint ==
-== How to mix and spray Laquer ==
-== How to mix and spray Acrylic Enamel ==
-== How to mix and spray Urethane Enamel ==
-== How to mix and spray Waterbased paints ==
-== How to finish off you paint job (Buffing) ==
-Buffing is a whole 'nother technique which you do when painting your car, it will be discussed in detail in its own article: [[Buffing your newly-finished paint]]

Latest revision as of 07:04, 15 January 2025