Painting chrome wheels

From Crankshaft Coalition Wiki
Jump to: navigation, search
(New page: I have a set of Chrome Wheels that I want to Paint to match my Vehicle. I am unsure if I should use an etching primer or epoxy before a urethane primer. What proceedure would anyone reco...)
 
(Blanked the page)
 
Line 1: Line 1:
I have a set of Chrome Wheels that I want to Paint to match my Vehicle.
 
  
I am unsure if I should use an etching primer or epoxy before a urethane primer.  What proceedure would anyone recommend?
 
 
I was going to try teh following:
 
- scuff chrome with 120-180 grit sanding sponge
 
- etch prime (Varaprime 615S)- 1 coat
 
- urathane prime (PPG k36)- 2 coats
 
- sand 600grit
 
- basecoat (PPG Evirobase HP) - 3 coats
 
- Clearcoat (PPG DC3000 or Dc4000) 2-3 coats
 
 
Any thoughts on my procedure?  What if I need to use of polyfill (or other)... will this cause a problem if I apply an etching over it.
 
 
Thanks, Scott
 

Latest revision as of 09:35, 16 January 2025

Personal tools
Namespaces
Variants
Actions
Navigation
Categories
Toolbox