Removing stuck fasteners
(→Tips for broken-off bolt heads) |
(→General Advice) |
||
| Line 8: | Line 8: | ||
*When taking off cylinder head studs, look at the base. If you see erosion into the stud at the block surface, odds are pretty good you will break the stud. | *When taking off cylinder head studs, look at the base. If you see erosion into the stud at the block surface, odds are pretty good you will break the stud. | ||
* Whatever system you use, once you have a hold of the bolt,stud, or whatever, try rocking it forward and reverse a little at a time. If you can get it to move, it is more likely to come out. An older mechanic said always try to tighten a little before you loosen. Remember, if it moves, you are half way home. Also, brake fluid works great as a penetration oil. | * Whatever system you use, once you have a hold of the bolt,stud, or whatever, try rocking it forward and reverse a little at a time. If you can get it to move, it is more likely to come out. An older mechanic said always try to tighten a little before you loosen. Remember, if it moves, you are half way home. Also, brake fluid works great as a penetration oil. | ||
| + | If she ain't glowing, she ain't going | ||
==Smack it with a hammer== | ==Smack it with a hammer== | ||
Your Privacy Choices