How to title a hot rod

Jump to: navigation, search
(Alabama)
(Connecticut)
Line 378: Line 378:
  
 
===Connecticut===
 
===Connecticut===
 +
Building your own hot rod or chopper? Remember, if you want to ever drive your custom-built vehicle, you're going to need to register it. Connecticut allows registration of custom-built/composite vehicles, but the vehicle must first pass a special inspection process.
 +
Before You Start Building
 +
 +
If you've used parts from other vehicles to build your own, you need to make sure you have title certificates for each vehicle used for component parts, as well as receipts for all parts used. If any parts are from used vehicles, you need to include VIN numbers on each receipt.
 +
 +
To get a registration, you're going to have to submit your vehicle to a detailed inspection process, during which time you are required to show all receipts and titles. No receipts means no inspection and no registration.
 +
 +
Ready for Inspection
 +
When you're ready for the vehicle to be registered and inspected, you need to do the following:
 +
 +
    * Use the Department of Motor Vehicles telephone center to make an appointment for a composite vehicle inspection. Composite inspections are done at the Wethersfield office only by appointment.
 +
 +
    * Transfer the vehicle by flat-bed truck or trailer to the inspection station. You cannot drive or tow the vehicle. None of its wheels can touch the ground until it passes inspection and you are granted a registration.
 +
 +
    * Complete an application for composite inspection and bring it to the DMV inspection station, along with two photos of the vehicle and all supporting documents―including titles and receipts for all major parts. The inspection fee is $88 and the VIN costs another $50.
 +
 +
    * If your vehicle passes inspection, the DMV inspector will assign a VIN to your vehicle, which will allow you to begin the standard process of applying for a registration and title. If you fail, you can ask for a re-inspection without going through the appointment process.
 +
 +
You're also going to have to submit your vehicle for an emissions exam. Some vehicles are exempt from emissions testing. Until January 2007, any composite vehicle that is not exempt must pass standard state emission testing. After new rules go into effect in January 2007, composite vehicles will have to meet specific standards.
 +
 +
 +
 +
 +
Exempt Vehicles
 +
 +
There are some exemptions to the program, particularly newer models, many older vehicles, motorcycles and other specialized vehicles:
 +
 +
    * New vehicles that are four or less model years old (as of 1/1/07 model years, 2005, 2006, 2007 and 2008).
 +
    * A motor vehicle twenty five-years old or older, (as of 1/1/07, model years 1983 and older).
 +
    * Vehicles with a gross vehicle weight rating of more than 10,000 pounds, such as certain heavy-duty trucks or recreational vehicles
 +
    * Composite Vehicles ( Effective July 1, 2007)
 +
    * Electric-powered vehicles
 +
    * Bicycles with motors attached
 +
    * Motorcycles
 +
    * Certain vehicles registered but not designed primarily for highway use
 +
    * Farm vehicles
 +
    * Class-1 School Buses
 +
    * Vehicles with Dealer, Repairer, or Transporter Plates while official tests are obtained
  
 
===Delaware===
 
===Delaware===

Revision as of 23:12, 20 September 2007

Personal tools
Namespaces
Variants
Actions
Navigation
Categories
Toolbox