Rust, pitted
(→High-build primers and related products) |
|||
| Line 38: | Line 38: | ||
==Filling in the pits== | ==Filling in the pits== | ||
| + | [[Image:blank.jpg|right|thumb|350px|The pitted areas have been filled. If you have this image, or can take the necessary photograph, please [[Special:Upload|upload it to the wiki]].]] | ||
Now that the rust has been removed, the pitted area of bare metal has to be filled. First, clean with a wax and grease remover ''(confirm this, and add other cleaning/coating options here)''. Then, the pits are typically filled by priming with a high-build primer, several of which are listed below. Generally, the less product used, the better. However, it may be necessary to repeatedly prime and block sand to fill the pits. | Now that the rust has been removed, the pitted area of bare metal has to be filled. First, clean with a wax and grease remover ''(confirm this, and add other cleaning/coating options here)''. Then, the pits are typically filled by priming with a high-build primer, several of which are listed below. Generally, the less product used, the better. However, it may be necessary to repeatedly prime and block sand to fill the pits. | ||
Your Privacy Choices