Oiling system Chevy V8

From Crankshaft Coalition Wiki

Jump to: navigation, search

@@ Line 1: / Line 1: @@
-==Overview==
-One plug that can be easily forgotten is the plug located "under" the rear main cap (as viewed with the engine block on an engine stand in position to install the plug).
-==Plug dimensions and part numbers==
-===1985-back with 2-piece rear main seal===
-The plug is a 1/2" OD (0.520”-0.536" OD x 0.300" deep) steel expansion plug. GM part number is 3701638 (Pioneer EPC-87, Dorman 555005). The passageway can be tapped for a 1/4” NPT plug; this requires a long tap to reach the area that needs to be threaded.
-===1986-up with 1-piece RMS===
-Some engines used a steel ball instead of a cup plug. These engines are the 1986-up 1-piece RMS blocks including the Gen 2 LT1. These blocks can’t be tapped for a 1/4” NPT plug, the hole is smaller than the 1/2" ball or cup plug used in 1985-back Gen I SBC blocks with 2-piece RMS. The part number for these '86-up 1-piece RMS blocks is Pioneer '''EPC108'''.
-[[File:Sbc oil plug rear main 2.jpg|thumb|left|600px|Oil filter bypass plug location]] <br style="clear:both"/>
-[[File:SBC OILING DIAGRAM 2.jpg]] <br style="clear:both"/>

Latest revision as of 07:18, 12 January 2025