|
|
| Line 1: |
Line 1: |
| − | *This page will show horsepower and torque results using different combinations of parts....
| |
| | | | |
| − | *355 Gen I Chevy street motor, 453 HP, 475 ft-lbs torque.
| |
| − | *Block: '68-'86 Chevy 350 Gen I bored +0.030".
| |
| − | *Crank: Stock 350, 3.48" stroke, 2.450" main journal diameter.
| |
| − | *Rods: Stock 350 5.7". Recommend ARP bolts, re-size big end.
| |
| − | *Pistons: Keith Black hypereutectic, part #KB193, 12cc D-cup, 5/64,5/64,3/16 rings. 1.561" compression height. Gap top ring 0.026", second ring 0.018".
| |
| − | *Heads: RHS Pro Torquer Vortec 170-64, 2.02" intake, 1.60" exhaust. These heads will accept either conventional or Vortec type intake manifolds. They are drilled and tapped for both types.
| |
| − | *Intake manifold: Dual-plane, high-rise such as the Edelbrock RPM, Weiand Stealth or Professional Products Typhoon.
| |
| − | *Carburetor: Vacuum secondaries 750 CFM.
| |
| − | *Headers: 1 3/4" primaries, long-tube, equal-length. Install "X" pipe between collectors and mufflers. Run 2 1/2" pipe to the rear through mufflers of your choice.
| |
| − | *Camshaft: CompCams flat tappet hydraulic, installed straight up.
| |
| − | *http://www.compcams.com/Cam_Specs/CamDetails.aspx?csid=72&sb=0
| |
| − | *Static Compression Ratio: 9.6:1
| |
| − | *Dynamic Compression Ratio: 8.4:1
| |
| − | *Squish: 0.035" to 0.045". Zero deck with 0.035" to 0.045" head gasket or 0.010" to 0.020" piston deck height with Victor Reinz #5746 head gasket, compresses to 0.025".
| |
| − | *RPM HP TQ
| |
| − | *1000 59 310
| |
| − | *1500 103 361
| |
| − | *2000 150 395
| |
| − | *2500 192 402
| |
| − | *3000 246 431
| |
| − | *3500 306 459
| |
| − | *4000 360 473
| |
| − | *4500 407 475
| |
| − | *5000 442 464
| |
| − | *5500 453 433
| |
| − | *6000 450 394
| |
Your Privacy Choices