Doug Nash transmission

From Crankshaft Coalition Wiki

Jump to: navigation, search

Revision as of 00:00, 17 June 2009 (edit) Jon (Talk \| contribs) m (Doug Nash trans questions moved to Doug Nash transmission: Moving specific question to more general article.) ← Older edit		Latest revision as of 22:18, 25 July 2023 (edit) (undo) 184.155.19.204 (Talk) (Blanked the page)
Line 1:		Line 1:
−	I am building a 68 camaro and I already have a 454 bored .060 over , eagle forged rotating assembly , a .540/.540 comp cam and hydraulic lifters , I have a Doug Nash 5 speed with a long vertigate shifter . I have a lakewood bell housing and I've already purchased a ram billet flywheel , ram clutch, ram pressure plate . The bearing surface for the throwout bearing on the tranny is about 1.37 (od) . My question is what throwout bearing am I going to need to use ? I've talked to the tech line at Summitt and they have no clue , I called Richmond and they were absolutely no help , and I just want to get this right, so if anybody can help me , I would really appreciate it-------thanks//Tony	+

Latest revision as of 22:18, 25 July 2023