Crankshaft Coalition Wiki

Jump to: navigation, search

Revision as of 23:32, 2 March 2007 (view source) Jon (Talk \| contribs) ← Older edit		Revision as of 23:32, 2 March 2007 (view source) Jon (Talk \| contribs) Newer edit →
Line 9:		Line 9:

	[[Image:Axle_straightening_table.jpg\|thumb\|left\|A gas cylinder cart, converted for straightening rear end housings.]][[Image:Modified_jackstands.jpg\|thumb\|left\|Basic inexpensive jackstands are modified to wrap the I-beam for stability.]][[Image:Straight_bar_in_inserts.jpg\|thumb\|left\|A straight bar is inserted into the custom inserts to confirm straightness]][[Image:Heating_the_axle_tube.jpg\|thumb\|left\|A band is heated all around the tube, at the point of bend.]]		[[Image:Axle_straightening_table.jpg\|thumb\|left\|A gas cylinder cart, converted for straightening rear end housings.]][[Image:Modified_jackstands.jpg\|thumb\|left\|Basic inexpensive jackstands are modified to wrap the I-beam for stability.]][[Image:Straight_bar_in_inserts.jpg\|thumb\|left\|A straight bar is inserted into the custom inserts to confirm straightness]][[Image:Heating_the_axle_tube.jpg\|thumb\|left\|A band is heated all around the tube, at the point of bend.]]
		+
		+
		+
		+

Revision as of 23:32, 2 March 2007