Straightening a rear end housing

Jump to: navigation, search
(Heating and bending)
Line 28: Line 28:
  
 
==Heating and bending==
 
==Heating and bending==
Next, rig a chain at the point of bend, and put a 12-ton bottle jack under the end of the axle. To prevent bending the center casing, put the rear cover on.
+
Next, rig a chain at the point of bend, and put a 12-ton bottle jack under the end of the axle. To prevent bending the center casing, attach the rear cover.
 
[[Image:Bottle_jack_and_chain.jpg|frame|none|A bottle jack and chain are used for bending.]]
 
[[Image:Bottle_jack_and_chain.jpg|frame|none|A bottle jack and chain are used for bending.]]
  

Revision as of 01:35, 1 March 2007

Personal tools
Namespaces
Variants
Actions
Navigation
Categories
Toolbox