Intake manifold

Jump to: navigation, search
(Add text)
m (Using early intake on later (non Vortec) heads)
Line 145: Line 145:
 
[[File:VORTEC INTAKE BOLTS.jpg|thumb|left|]] <br style="clear:both"/>
 
[[File:VORTEC INTAKE BOLTS.jpg|thumb|left|]] <br style="clear:both"/>
  
===Using early intake on later (non Vortec) heads===
+
==Using early intake on later (non Vortec) heads==
 
On the 1986-back heads and intakes, the center four bolts were the same angle as the other bolts. 1987-up use a different 72 degree angle except for Corvette aluminum heads. To compensate, spacer/washers can be made or [http://www.holley.com/90748.asp '''bought'''] to allow the intake to fit.
 
On the 1986-back heads and intakes, the center four bolts were the same angle as the other bolts. 1987-up use a different 72 degree angle except for Corvette aluminum heads. To compensate, spacer/washers can be made or [http://www.holley.com/90748.asp '''bought'''] to allow the intake to fit.
  

Revision as of 08:00, 13 June 2013

Personal tools
Namespaces
Variants
Actions
Navigation
Categories
Toolbox