Brakes

Jump to: navigation, search
(Drum brakes)
Line 38: Line 38:
  
 
===Leading/trailing shoe drum brakes===
 
===Leading/trailing shoe drum brakes===
These are seen in lighter duty applications such as the rear brakes of a front wheel drive vehicle. On them, the bottom of the shoes are solidly held against a pivot point, and only the tops of the shoes expand out to contact the drum. This design has less braking ability than a duo-servo type brake because only the front shoe has a self-energizing effect. In this setup, the front (leading) shoe is often the same as the rear (trailing) shoe as far as the amount of friction material covering the steel backing shoe, but the material may be thicker on the front (self-energizing) shoe.
+
These are seen in lighter duty applications such as the rear brakes of a front wheel drive vehicle. On them, the bottom of the shoes are solidly held against a pivot point, and only the tops of the shoes expand out to contact the drum. This design has less braking ability than a duo-servo type brake because only one shoe has a self-energizing effect. In this setup, the front (leading) shoe may be the same as the rear (trailing) shoe as far as the amount of friction material covering the steel backing shoe, but the material may be thicker on the front (self-energizing) shoe. In other cases the front shoe will be smaller like the duo-servo type.
  
 
===Other drum brakes===
 
===Other drum brakes===

Revision as of 02:50, 1 February 2013

Personal tools
Namespaces
Variants
Actions
Navigation
Categories
Toolbox