Pilot bearing and bushings
(Add text, link.) |
|||
| Line 80: | Line 80: | ||
To remove, install tool J-1448 and remove bearing from crankshaft. In replacing this bearing, use tool J-1522. Place bearing on pilot of tool with radius in bore of bearing next to shoulder on tool and drive into crankshaft. Lubricate with several drops of machine oil. | To remove, install tool J-1448 and remove bearing from crankshaft. In replacing this bearing, use tool J-1522. Place bearing on pilot of tool with radius in bore of bearing next to shoulder on tool and drive into crankshaft. Lubricate with several drops of machine oil. | ||
| + | |||
| + | ==Olds transmission input pilots== | ||
| + | Olds cranks weren't all machined for a manual tranny pilot. See p/n's 450, 455 and 460- [http://www.mondellotwister.com/Transmission.htm Mondello tranny pilots]. | ||
| + | |||
| + | The better way to do the input pilot is to use the BBC bearing, as shown. But the other two can be used w/minimal machine work. Like they say, "down & dirty". But to do it 'right' requires the crank to be removed or at least the engine. | ||
==Resources== | ==Resources== | ||
Your Privacy Choices