Intake manifold

Jump to: navigation, search

@@ Line 36: / Line 36: @@
 [[File:Typhoon 52021.jpg|thumb|300px|Typhoon p/n 52021]]
-Professional Products makes a manifold of this design also, called the Typhoon, p/n 52021 for satin finish.
+Professional Products makes a manifold of this design also, called the Typhoon, p/n 52021 for satin finish. The Power+Plus Typhoon Manifold is a high performance dual plane, 180° street manifold designed to be used with Holley, Carter AFB, or Edelbrock square bore carbs. For street applications use 600-700 cfm vacuum secondary carbs. For high performance street, use 700- 800 cfm double pumper carburetors. This manifold produces power comparable to some single plane manifolds yet retains the throttle response and drive ability typical of a dual plane. This manifold also features cast-in nitrous bosses with water outlets at all four corners plus dual distributor holddowns. This manifold is .70-inches taller than the PP-52000 or PP-52001. It has a provision to add an oil fill tube. No provision for exhaust heated or stock style chokes. Accepts late model waterneck, A/C, alternator, and HEI. Will fit cast iron bow tie heads and ‘87-’95 cast iron or aluminum heads. Will not fit under a stock Vette hood. This product can be found at <a href="https://performanceinjection.com/index.php?c=0&p=369">www.performanceinjection.com</a>
 <br style="clear:both"/>

Revision as of 07:14, 16 August 2012