DynoSim combinations
m |
(→The following will show horsepower and torque results using different combinations of parts) |
||
| Line 88: | Line 88: | ||
*Carburetor: Vacuum secondaries 850. | *Carburetor: Vacuum secondaries 850. | ||
*Headers: 1 3/4" primaries, long-tube, equal-length. Install "X" pipe between collectors and mufflers. Run 2 1/2" to 2 3/4" pipe to the rear through mufflers of your choice. | *Headers: 1 3/4" primaries, long-tube, equal-length. Install "X" pipe between collectors and mufflers. Run 2 1/2" to 2 3/4" pipe to the rear through mufflers of your choice. | ||
| − | *Camshaft: Compcams hydraulic flat tappet, installed 2 degrees retarded: [http://www.compcams.com/Cam_Specs/CamDetails.aspx?csid=79&sb=0]. | + | *Camshaft: Compcams 12-212-2 hydraulic flat tappet, installed 2 degrees retarded: [http://www.compcams.com/Cam_Specs/CamDetails.aspx?csid=79&sb=0]. |
*Rocker arms: 1.6, lift at valve 0.512". | *Rocker arms: 1.6, lift at valve 0.512". | ||
*Static compression ratio: 10.0:1. | *Static compression ratio: 10.0:1. | ||
Your Privacy Choices