Epoxy primer

Jump to: navigation, search
(Spray (rattle) can epoxy primer)
m (Temperature: --~~~~)
Line 21: Line 21:
  
 
===Temperature===
 
===Temperature===
The temperature of the air and of the metal '''must''' be taken into account -- it must be high enough for the epoxy primer to properly cure. If the temperature drops below proper temp before it is fully cured, the paint will be bad as the chemical reaction does not continue when the temp rises again.
+
The temperature of the air and of the metal '''must''' be taken into account -- it must be high enough for the epoxy primer to properly cure. Note that in cold weather conditions, surface temperatures can be far lower than air temperatures. If the surface temperature drops below a particular value specified by the product manufacturer (usually around 60 degrees F) before it is fully cured, the epoxy may not properly cure even with later applications of heat.
  
 
===Acids===
 
===Acids===

Revision as of 14:54, 13 December 2009

Personal tools
Namespaces
Variants
Actions
Navigation
Categories
Toolbox