Stripping paint

Jump to: navigation, search
(Homemade scraping tool)
Line 57: Line 57:
  
 
====Homemade scraping tool====
 
====Homemade scraping tool====
Start with a stiff putty knife or drywall tool. Round the corners, then re-sharpen on a belt sander,Only sharpen one side,NOT both, then on a knife sharpening stone. Hold the knife with both hands, at a 90-degree angle to the surface. Start to scrape, and adjust the angle until you get the best results.As it wears you can resharpen the blade with a da sander 80-180-320 that'll get it razor sharp again.
+
Start with a stiff putty knife or drywall tool. Round the corners, then re-sharpen on a belt sander. Only sharpen one side, not both, then on a knife sharpening stone. Hold the knife with both hands, at a 90-degree angle to the surface. Start to scrape, and adjust the angle until you get the best results. As it wears, you can resharpen the blade with a DA sander: 80-180-320that'll get it razor sharp again.
  
 
====Media blasting====
 
====Media blasting====

Revision as of 14:56, 5 September 2009

Personal tools
Namespaces
Variants
Actions
Navigation
Categories
Toolbox