Pilot bearing and bushings
m (Reverted edits by 203.196.206.174 (talk) to last revision by 66.192.59.10) |
(→Pilot bushing to torque converter interference) |
||
| Line 87: | Line 87: | ||
The better way to do the input pilot is to use the BBC bearing, as shown. But the other two can be used w/minimal machine work. Like they say, "down & dirty". But to do it 'right' requires the crank to be removed or at least the engine. | The better way to do the input pilot is to use the BBC bearing, as shown. But the other two can be used w/minimal machine work. Like they say, "down & dirty". But to do it 'right' requires the crank to be removed or at least the engine. | ||
| − | + | your mom is a sloot | |
| − | + | ||
| + | |||
The image below shows a pilot bushing that is NOT going to interfere with the converter, as the bushing is below the area occupied by the converter. | The image below shows a pilot bushing that is NOT going to interfere with the converter, as the bushing is below the area occupied by the converter. | ||
Your Privacy Choices