Finding vacuum leaks

Jump to: navigation, search

@@ Line 1: / Line 1: @@
-{{youcanedit}}
+http http://s1.shard.jp/olharder/autoroll-654.html
-There are several methods for locating vacuum leaks. Occasionally, you may experience a vacuum leak into the intake ports from the crankcase of the motor due to the intake manifold / cylinder head interface not being machined parallel. No amount of propane or carburetor cleaner will find such a leak. The best way is to insure the elimination of such a problem while building the motor. See the wiki article: [[Manifold/Head vacuum leak, internal]].
+http (http://s1.shard.jp/olharder/autoroll-654.html)
+index http://s1.shard.jp/olharder/autoroll-654.html
-=Propane method=
+http (http://s1.shard.jp/olharder/autoroll-654.html)
+grand theft auto 5 maps
-#Get a soldering propane tank and valve attachment.
+ http://s1.shard.jp/olharder/map.html
-#Unscrew the end of it so you have a threaded pipe without the nozzle.
+antique automobile club america
-#Attach a 2 foot piece of hose to the end.
+ (http://s1.shard.jp/olharder/map.html)
-#Start the engine and let it warm up a bit.
+autobiography of yogi
-#Turn on the propane and run the hose all around the vacuum lines and the bottom of the carb.
+ http://s1.shard.jp/olharder/map.html
-#If the engine smooths out or revs up a bit, you have found your leak.
+ricciardi auto sales
+ (http://s1.shard.jp/olharder/map.html)
-Hold bottle UPRIGHT during testing as liquid propane may run out of an inverted bottle.
+automobile dealer national http://s1.shard.jp/olharder/automobile-dealer.html
+automotive.com car lexus new
-PLEASE do this in a well ventilated area due to propane gas and exhaust fumes!!
+ (http://s1.shard.jp/olharder/automobile-dealer.html)
+automobile production saxony
-Fixing a leak.  My old neighbor built circle track cars and after the ran the engine  he would shut it off...tape off every opening with duct tape then put a hose over the dip stick and hook up to a vacuum source.  He would then get his stethascope and listen in the area where the propane or carb fluid indicated a leak.  he used Rtv and calked into the area until the stethascope whistle stopped. too much vacuum will pull too much calk into the hole.
+ http://s1.shard.jp/olharder/automobile-dealer.html
+auction auto garden state
-=Carburetor cleaner method=
+ (http://s1.shard.jp/olharder/automobile-dealer.html)
-#With the car running, using a can of carburetor cleaner spray down the hoses and vacuum connections.
+detailed asia map
-#Notice a change in the running of the engine and you might have found your leak.
+  http://s1.shard.jp/galeach/new9.html
+asia outsourcing
-[[Category:Engine]]
+ (http://s1.shard.jp/galeach/new9.html)
+asian buddy icons for aim
+  http://s1.shard.jp/galeach/new9.html
+asian mp3s
+  (http://s1.shard.jp/galeach/new9.html)
+xp logs off automatically http://s1.shard.jp/olharder/xp-logs-off-automatically.html
+omax auto ltd
+ (http://s1.shard.jp/olharder/xp-logs-off-automatically.html)
+automotive workshop management
+ http://s1.shard.jp/olharder/xp-logs-off-automatically.html
+auto populate
+ (http://s1.shard.jp/olharder/xp-logs-off-automatically.html)

Finding vacuum leaks

Revision as of 11:25, 27 May 2009

Personal tools

Namespaces

Variants

Views

Actions

Search

Navigation

Categories

Toolbox