Building Chevy 4.3 liter V6 - 1994 with balance shaft
(→THE PARTS) |
(→THE PARTS) |
||
Line 239: | Line 239: | ||
'''ROCKER ARMS''' | '''ROCKER ARMS''' | ||
− | COMPCams 1618-1 (CCA-1618-1) Ultra Pro Magnum Rocker Arm at 1.6:1 ratio. I have ordered just a single one to be able to check the valvetrain geometry for the machining of the studs and check rocker arm height with the OEM valves. At the same time I want to make sure they do not interfere with the OEM plastic covers. With the new camshaft I should already have about .100" more lift at the camshaft. I'll see during a test assembly if it fits. | + | COMPCams 1618-1 (CCA-1618-1) Ultra Pro Magnum Rocker Arm at 1.6:1 ratio. I have ordered just a single one to be able to check the valvetrain geometry for the machining of the studs and check rocker arm height with the OEM valves. At the same time I want to make sure they do not interfere with the OEM plastic covers. With the new camshaft I should already have about .100" more lift at the camshaft. I'll see during a test assembly if it fits. The lifter I have been sent is a self adjusting featuring two lips left and right of the roller tip thus most probably eliminating the need for guide plates. |
'''ROCKER ARM STUD KIT and a warning''' | '''ROCKER ARM STUD KIT and a warning''' |