Finding vacuum leaks

Jump to: navigation, search
m (Reverted edits by 82.34.154.62 (Talk); changed back to last version by Alittle1)
(http://huruple.qsh.eu/20090105-roulette-video.htm)
Line 1: Line 1:
−
{{youcanedit}}
+
roulette video http://huruple.qsh.eu/20090105-roulette-video.htm
−
There are several methods for locating vacuum leaks. Occasionally, you may experience a vacuum leak into the intake ports from the crankcase of the motor due to the intake manifold / cylinder head interface not being machined parallel. No amount of propane or carburetor cleaner will find such a leak. The best way is to insure the elimination of such a problem while building the motor. See the wiki article: [[Manifold/Head vacuum leak, internal]].
+
<a href="http://huruple.qsh.eu/20090105-roulette-video.htm">roulette video</a>
−
 
+
[url=http://huruple.qsh.eu/20090105-roulette-video.htm]roulette video[/url]
−
=Propane method=
+
[link=http://huruple.qsh.eu/20090105-roulette-video.htm]roulette video[/link]
−
 
+
movie hold boom box over your head http://tacataca.strefa.pl/comment-1253.htm
−
#Get a soldering propane tank and valve attachment.
+
<a href="http://tacataca.strefa.pl/comment-1253.htm">movie hold boom box over your head</a>
−
#Unscrew the end of it so you have a threaded pipe without the nozzle.
+
[url=http://tacataca.strefa.pl/comment-1253.htm]movie hold boom box over your head[/url]
−
#Attach a 2 foot piece of hose to the end.
+
[link=http://tacataca.strefa.pl/comment-1253.htm]movie hold boom box over your head[/link]
−
#Start the engine and let it warm up a bit.
+
erster frauenarztbesuch video http://lifokdron.0lx.net/409.html
−
#Turn on the propane and run the hose all around the vacuum lines and the bottom of the carb.
+
<a href="http://lifokdron.0lx.net/409.html">erster frauenarztbesuch video</a>
−
#If the engine smooths out or revs up a bit, you have found your leak.
+
[url=http://lifokdron.0lx.net/409.html]erster frauenarztbesuch video[/url]
−
 
+
[link=http://lifokdron.0lx.net/409.html]erster frauenarztbesuch video[/link]
−
PLEASE do this in a well ventilated area due to propane gas and exhaust fumes!!
+
jackass the movie mouse traps http://betheres.qsh.eu/comment-575.htm
−
 
+
<a href="http://betheres.qsh.eu/comment-575.htm">jackass the movie mouse traps</a>
−
=Carburetor cleaner method=
+
[url=http://betheres.qsh.eu/comment-575.htm]jackass the movie mouse traps[/url]
−
#With the car running, using a can of carburetor cleaner spray down the hoses and vacuum connections.
+
[link=http://betheres.qsh.eu/comment-575.htm]jackass the movie mouse traps[/link]
−
#Notice a change in the running of the engine and you might have found your leak.
+
editor freelance nyc video http://golxando.0lx.net/1058514938.html
−
 
+
<a href="http://golxando.0lx.net/1058514938.html">editor freelance nyc video</a>
−
[[Category:Engine]]
+
[url=http://golxando.0lx.net/1058514938.html]editor freelance nyc video[/url]
 +
[link=http://golxando.0lx.net/1058514938.html]editor freelance nyc video[/link]

Revision as of 05:45, 9 January 2009

Retrieved from "https://www.crankshaftcoalition.com/wiki/index.php?title=Finding_vacuum_leaks&oldid=10060"
Personal tools
Namespaces
Variants
Actions
Navigation
Categories
Toolbox
 
Terms of Use
Copyright
Privacy Policy