Editing Talk:Milling cylinder heads
Line 1: | Line 1: | ||
{{Note1}}{{Sign2}} | {{Note1}}{{Sign2}} | ||
− | ==Angle milling== | + | ==Angle milling==You may want to add milling the heads 0.5 or 1.0 degrees towards exhaust side to lower chamber cc to increase compression ratio without changing valvetrain geometry too much.--[[User:Error 401|Error 401]] 15:28, 18 February 2016 (MST) |
− | You may want to add milling the heads 0.5 or 1.0 degrees towards exhaust side to lower chamber cc to increase compression ratio without changing valvetrain geometry too much.--[[User:Error 401|Error 401]] 15:28, 18 February 2016 (MST) | + |